What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 02:56

Barnstars:
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–14 [Omar Gharbi Omar Gharbi ]
How Cocaine Hijacks the Brain - Neuroscience News
What is lightning?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What does a fuse do?
This device then solves the entire problem.
These are simplified answers to the original question, and does not change anything I wrote above.
Opal Suchata Chuangsri from Thailand crowned Miss World 2025 - CNN
A circuit breaker is similar, but is resettable.
In schematic diagrams this is the symbol for a fuse:
He then describes Rainy Season and Lightning.
What are some ten strong legal evidences that are needed for a divorce?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The third is lightning and “how it gets conducted into a home.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Satellite measures river flow waves for the first time - The Washington Post
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where the MOV conducts again, and dissipated the energy.
Why do I want to suck cock tonight?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but I think this circuit , shows a few more pieces.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Edit 2024–10.
But… the neutral is now “floating” because of the 1 ohm resistance.
Now when you have a certain ac resistance, then a current flows in a loop.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Because the load is inductive, the current lags the voltage.(by a bit).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
An AC voltage/ current source, and an ac inductive load.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At one ohm, the resistor has a maximum of 1 watt power.
Mario Kart World tech analysis, including frame rate and resolution - Nintendo Everything
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
what exactly is a ‘surge’ protector?
[old diagram got deleted by accident]
PS5 has a huge price advantage over Xbox and Switch 2 right now - Eurogamer
It seems Mohan does not understand the difference between a comment and an Answer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
For this case there are devices called Metal oxide varistors (MOV).
so, what happens?
The bolt then partially travels down the line to your home.
(Dc diagram shown, AC is similar).
2024–10–10[John johnson John Johnson ]
Upvotes:
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Here is a simplified AC power diagram.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
First Sentence:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
I post the exact comment here.
the problem then depends on "how fast does the fuse operate?".
One
One is “what exactly is in a ‘surge protector’ ? ”
nine
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
[image of Common-mode choke]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
A fuse is a non-resetable over current circuit protector.
He then asserts :
This one hit behind the barn.
But it can get overloaded, and no longer works.
There are two important concepts here.
It also is a device that limits the change in current flow.
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
eight
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
a photo is worth a thousand words.